Configuring the base station channels

If you're using more than two SteamVR Base Stations 2.0 in your play area, you can change the channel of the additional base stations.

Important: In the SteamVR app, make sure Enable Bluetooth in

> Devices > Bluetooth Settings is selected.

From your computer, open the SteamVR app.
Click , and then select Devices > Base Station Settings.
Under Base Station 2.0, click Configure Base Station Channels. SteamVR will scan for base stations in the play area. Once complete, you'll see a list of base stations. If you have base stations that have not been detected, click Scan For More.
To change its channel, click on a base station link. Select an unused channel, and then click Apply.
Tip: You can also click Automatic Configuration to let SteamVR set the channels.

If you're prompted that there is a channel conflict, click Continue to resolve the error.
When you're finished making the changes, click Done.

Was this helpful? Yes No

Submit

Thank you! Your feedback helps others to see the most helpful information.