Please Select Your Location
Australia
Österreich
België
Canada
Canada - Français
中国
Česká republika
Denmark
Deutschland
France
HongKong
Iceland
Ireland
Italia
日本
Korea
Latvija
Lietuva
Lëtzebuerg
Malta
المملكة العربية السعودية (Arabic)
Nederland
New Zealand
Norge
Polska
Portugal
Russia
Saudi Arabia
Southeast Asia
España
Suisse
Suomi
Sverige
台灣
Ukraine
United Kingdom
United States
Please Select Your Location
België
Česká republika
Denmark
Iceland
Ireland
Italia
Latvija
Lietuva
Lëtzebuerg
Malta
Nederland
Norge
Polska
Portugal
España
Suisse
Suomi
Sverige

DisplayPort (VIVE Focus Vision only)

Error code Issue Steps to resolve issue
331 No supported GPU found

Make sure your computer's GPU supports DSC (Display Stream Compression) and has at least 6 GB of VRAM.

Check Requirements if your computer's GPU meets the requirements to support DisplayPort mode.

332 No DisplayPort connection found
  1. Make sure the DisplayPort cable from the converter is connected to the DisplayPort port on your computer's GPU.
  2. If the problem persists, disconnect the VIVE Wired Streaming Kit from the headset and computer and unplug the VIVE Wired Streaming Cable from the converter. Then reconnect the headset to the computer. See Connecting VIVE Focus Vision to your computer using the VIVE Wired Streaming Kit.
  3. If the problem persists, restart the headset.

For more solutions, see Why is it still USB streaming even when I've connected VIVE Focus Vision to a DisplayPort port on my computer?.

333 GPU driver for DP mode is outdated The NVIDIA GPU driver is too old. We recommend updating the driver to version 560.94 or later.
334 DP mode could not be enabled Try the following:
  • Connect the converter to another DisplayPort port on your computer.
  • Restart your computer.
335 Headset could not be detected via DP
  1. Disconnect the L-connector of the VIVE Wired Streaming Cable from VIVE Focus Vision.
  2. Reconnect the cable to the headset.
  3. Restart the headset.
  4. Restart VIVE Hub.
337 You've exceeded the maximum number of monitors. Your PC's graphics card has reached the maximum number of monitors it can support simultaneously and therefore a DisplayPort connection cannot be initiated. Before starting your DisplayPort mode streaming session, try the following:
  • Unplug your other monitors and only keep one or two connected to your graphics card.
  • Lower the display resolution and refresh rate of your monitor(s).
Submit
Thank you! Your feedback helps others to see the most helpful information.