-
Overview
-
Getting started
-
Hardware
-
Setup (headset and controllers)
-
Setup (play area)
-
Basics
-
Mixed reality
-
Additional accessories
-
-
Managing screenshots, files, and apps
- Connecting the headset to your computer
- Transferring screenshots and screen recordings to your computer
- Browsing and viewing files
- Viewing 360° photos
- Connecting an external storage device to the headset
- Copying files between the headset and external storage
- Installing apps on the headset
- Installing APK files on the headset
- Uninstalling apps
- Changing app permissions
-
Using VIVE Manager
-
Sharing and streaming content
-
Settings
- Setting a device passcode
- Connecting to a Wi-Fi network
- Adding a VPN
- Adjusting the power frequency
- Adjusting audio settings
- Choosing a display mode
- Choosing a tracking mode
- Pairing Bluetooth devices
- Setting up and using Kiosk mode
- Installing system and firmware updates
- Resetting the headset (factory reset)
-
VIVE Focus Vision for Business
-
Solutions and FAQs
-
General
-
Headset and controllers
-
Play area
-
Eye tracking and IPD
-
System
-
Headset, battery cradle, and controller LEDs
The headset, battery, and controllers have LEDs that indicate various statuses.
Headset LED
The LED on the front side of the headset indicates the current status.
| LED | Status |
|---|---|
| White | The headset display is on. |
| Flashing white |
|
| Breathing white | The headset display is off or in standby mode. |
| Breathing red | Passthrough mode is on. |
| Green | The headset's USB Type-C port is connected to an external power source while the headset display is on. |
| Breathing green | The headset's USB Type-C port is connected to an external power source while the headset display is off or in standby mode. |
| Off | The headset is off. |
Battery LED
The power LED on top of the battery indicates the charging status.
When charging the battery
The battery LEDs will continuously display the current power level.
When using the headset
Press the power button to show the power level when the headset is idle.
Controller LED
Each controller has an LED that indicates its current status.
| LED | Controller status |
|---|---|
| Flashing red | Battery level is below 15% |
| Orange | Controller is charging |
| Flashing blue | Controller is in pairing mode |
| Blue | Controller is connecting to the headset |
| Flashing blue and orange alternately | Controller is connecting to the headset while it's charging |
| Green | Controller is connected to the headset |
| Flashing blue and red alternately | Controller firmware is being updated |
| Off | Controller is idle |
Was this helpful?
Yes
No
Submit
Thank you! Your feedback helps others to see the most helpful information.